Basic Info.
Certification
ISO9001, CE
Grid Type
off-Grid Inverter
Nature of Wave String
Sine Wave Inverter
Design Structure
Bat/AC Mode Selectable
Protections
Over Temp. Over Load, Over Voltage
Transport Package
Standard Exported Packing
Specification
CE; ISO9001
Origin
Shenzhen Guangdong
Product Description
SUN-D Series Off-Grid Inverter/Charger All-in-One System (8-12KW)
Sun-D Series is a full digitized controlled. powerful all-in-one Charger/INV System. It has dual AC Prioritized Mode and INV Prioritized Mode. Also equipped with adjustable large charging current charger, SIN Series can shorten the charging time to extend battery lifetime.High Performance Index
High overload ability ;
Low battery voltage trip selectable,extracting max power from various batteries with different protections ;
Low quiescent current,selectable sensing cycle to reduce power consumption;
Charging Section
3-step intelligent battery charging;
8 preset battery type selector plus de-sulphation for totally batteries;
Powerful charge rate up to 70Amp,selectable charging current;
PFC(Power Factor Correction)for charger, less power consumption than conventional units.
Transfer Section
Ability to switch the unit on/off manually ;
Ability to select/deselect power saver mode ;
17 alarms/warmings,informative for easier operation and troubleshooting ;
LCD status display available;
RS232 communication port optional
Compatible applications/loads
Sun-D Series is Suitable in the following Environments: SOHO, Office, NT Stations, IT Applications POS, Manufacturing, and etc.
Capacity | Sun 80-48D 8KW | Sun 100-48D 10KW | Sun 120-48D 12KW |
Host Machine Specification |
Design Structure | BAT/AC Mode Selectable |
External Structure | Output Isolated Transformer Design,Wall Mounted |
Overall Efficiency | Line Mode:>95% |
BAT Mode:>85% |
Power Saver :Available when the load is less than 75watts |
Noise(In 2 Meters) | < 60dB |
Working Temp. | 0-40ºC |
Storage Temp. | --25 ~ 60ºC(Without BATs) |
Humidity | < 95% Non-condensing |
Safety Standard | IEC62040 |
Protection | Overload, Short-Circuit, Over Temp., Utility Power Voltage High/low, BAT Voltage High/low |
Generator Capability | Yes |
AC Input Specification |
Phase & waveform | Single phase & Sinewave |
Input Voltage | 100/120/220/230/240Vac |
Input Frequency | 50Hz/60Hz (Auto-Tracking ) |
Input Voltage range | 154-273Vac |
Line Low Transfer | 154Vac |
Line Low Recovery | 164 Vac |
Line high transfer | 273Vac |
Line high Recovery | 263Vac |
Line Low Transfer | 40Hz |
Line high Transfer AC | 80Hz |
Output Specification |
Phase & waveform | Single phase & Sinewave (Sync to input on AC Mode) |
Output Voltage | 220Vac/230Vac/240Vac Single Phase (Sync to input on AC Mode ) |
Voltage regulation | ±10%rms ( Sync to input on AC Mode ) |
Output Frequency | 50/60Hz (Auto-Tracking) |
Frequency Tracking Range | 46-54Hz |
Output Waveform | Pure Sinewave |
Crest Ratio | 3∶1 |
Short Circuit Protection | Shutdown after 10 minutes |
Power Factor | 0.9-1.0 |
DC Input Parameters |
Battery Voltage | 48V dc |
Minimum Start Voltage | 40Vdc |
Low Voltage Alarm | 44Vdc |
Low Battery Transfer | 40Vdc |
High Voltage Alarm | 64Vdc |
Max Charging Current | 75A |
Overcharge Voltage | 62.8Vdc |
Indicators |
4-LED Display | Charge ,Line , Inverter , Fault |
LCD Display | Input Voltage,Output Voltage,Frequency , Battery Saving mode is on/off when push the switch forwards/backwards,keeping horizontal is turning inverter off |
Switch Selector | Saving mode is on/off when push the switch forwards/backwards,keeping horizontal is turning inverter off |
Audible Alarm | Sounding when the heatsink's Temp. is over 105 ºC and shutdown after 30 seconds |
Communication Parameters |
Communication Port | RJ11/RS232(Optional) |
Physical Parameters |
Size mm(DxWxH) | 549x450x201 | 584x450x201 |
Net Weight Kg | 56 | 64 | 68 |
Address:
2nd Floor, D Building, No. 1618, Yishan Road, Shanghai China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics, Electrical & Electronics
Management System Certification:
ISO 9001, ISO 14000
Company Introduction:
SHIDA (SUPSTECH), founded in 1997 as a subsidiary corporation of START COMPUTER GROUP, is based in Shanghai. We are one of the leading 1st generation of uninterruptible power supply (UPS) solution providers in China. For 20 years, we have been specialized in the research, manufacture, sales and services of UPS with our production base in Shenzhen. We accumulated rich experiences and typical cases in the range of applications to banks, insurance, securities, financial industry, international airport, utility electric supply, radio and television network, metro system, maritime bureau, medical system, public services, education, and cloud data center. Also we are working with GE, Delta, Emerson, Pakistan National Banks, Vodafone, Cornell University, InfoSec, and Olympic Organizing Committee internationally. Till now we have more than 20 offices & service centers at home and abroad, is the honorable brand name both in China and overseas.
With production capacity of 150, 000 units and 20 years of experiences in UPS industry, SUPSTECH ensures you with proven technique, high reliable quality, cost-effective and outstanding service.